Tank Top DIY - with free ICE SCREAM printable

Tara of the Sewing Rabbit Team is just one of those people that overflows with coolness.  When she shared with me this fun ‘Ice Scream’ sketch, I couldn’t stop giggling, I mean – how perfect is it for Summer? And it is just so reminiscent of my own childhood. I swear, we must have sang that ‘I scream You scream we all scream for ice cream’ song a bazillion times growing up!  Tara is here today with not only a cool printable for this retro shirt, but also an awesome DIY tutorial for turning a T-Shirt pattern into a retro tank. We’ve got all the Summer fun you need right here :).

Tee Pattern to Retro Tank – plus ‘Ice Scream’ Printable

IMGP6052

Hello Sewing Rabbit readers! How are you enjoying Springtime? Starting to get out the tanks and shorts, I’m sure! I have a simple DIY tee shirt hack to share with you today that’ll have you whipping out a slew of tanks for your kids in no time.

Lately I’ve been on a tank making kick and I came up with my own method of hacking a tee pattern into a cute little retro style skinny tank. Here are some of the examples from my recent sewing.

retrotankcollageroundup

They’re simple skinny muscle style tanks with ribbed armholes and neckline, with open ended room for creativity with fabrics and customizations. I’m also including a template for the “Ice Scream” stencil I made, should you be interested in making your own!

Supplies Needed:

<<Tee shirt pattern you own and love – OR use a current well fitting tee as a pattern. Dana has a tutorial on how to do that HERE

<< Jersey knit – about a half yard to 3/4 yard depending on what size your child wears – OR a large men’s tee to upcycle

<<1X1 ribbing or regular jersey with a good amount of stretch for armholes and neck

<<Freezer paper for stencil if you want to

<<Fabric paint

<<Basic sewing stuff

<<Some imagination

tanktutecollage

STEP ONE: Cut out your tee front and back just like you would if you were making a regular tee. (skip cutting sleeves! you totally don’t need them!)

STEP TWO: Lay your tee back on a cutting surface and lay the tee front directly on top with the shoulders and upper part of arm hole aligned exactly

STEP THREE: Measure in from the OUTER edge of the shoulder edge 3/4″ and make a mark. You could even cut off more depending on the look you’re going for. My end result is a shoulder that is about 1.5″ wide

STEP FOUR: Starting from the middle of the armhole curve, cut with a smooth slope up to meet your 3/4″ mark. You’ll have a little piece cut off like mine above.

OPTIONAL STEP FIVE: (I totally didn’t get a picture of this) Depending on how loosey goosey you feel with your improv cutting, you can deepen the curve of the armholes on the BACK piece to make it more racerback style. Just cut away about a half inch throughout the middle curve of the back arm holes.

retrotankcollage2

TIP: In all steps, sew using a zig zag or stretch stitch. I also finish my seam allowances with a serger just to make the garment stronger for my crazy kids who like to stretch the hell out of their clothes.

STEP SIX: Sew the shoulders and side seams as you usually would for the tee but INCREASE YOUR SEAM ALLOWANCE by 1/8″ to 2/8″ of an inch on the side seams.

You just want to make the tank fit nice and skinny, and it’s a judgment call for you based on the normal fit of the tee and your child’s size. If you make one of these to experiment with, you should have a pretty good idea of how this will work out in the future and adjustments to make (I used the Flashback Skinny Tee pattern from Rae because I know it well and have used it on my kids many times).

STEP SEVEN: Get your super scientific cap on and find a piece of string. Measure your arm hole by running the string along the edge of your tank. Mine was 4 3/4″ Then MULTIPLY THAT BY TWO. I know, I know…..math is the worst. But if I can do it, so can you.

STEP EIGHT: Cut two armbands and one neckband from ribbing or jersey. Arm bands will be LENGTH OF YOUR STRING MEASUREMENT X 2″ tall.

Neckband will be the size your pattern calls for OR you can do the string measurement thing and subtract about an inch in length so it doesn’t lay saggy – cut it that length x 2″ tall.

retrotankcollage3

STEP NINE: Sew armbands along the short edge RIGHT SIDES TOGETHER with a 1/4″ seam allowance. This will make it ever so slightly shorter than the shirt measurement, but it works fine.

STEP TEN: Turn your tank wrong side out and your arm bands wrong side out.

STEP ELEVEN: Slide the arm band onto the arm hole aligning with the raw edges of the tank. This will be a little fiddly at first because it’s a pretty small opening if you’re doing a little kid’s size. Just keep shimmying it on until you’ve got your arm band scootched all the way over onto the tank. It’s a hard step to photograph but will look like the top right in the collage.

STEP TWELVE: Sew with a 3/8″ seam allowance all the way around.

STEP THIRTEEN: Trim a tiny bit off of your seam allowance.

STEP FOURTEEN: Press your armband really well away from the tank and then turn the raw edge in halfway to the WRONG SIDE to meet up with the raw edge of your seam allowance. Fold it in half again to the right side of the tank, sandwiching the raw edge inside the arm band. Pin with the fold of the arm band just covering the previous stitching line underneath.

This is how you would apply bias binding to a woven fabric, but with a woven you would press the binding in half and the edges into the center line. You can’t really do that with jersey though because the pressed lines just come out anyway.

You will now have your binding pinned all around the arm hole.

STEP FIFTEEN: Turn your tank inside out again if you’ve turned it right side out to pin it. Stitch along the folded edge of your arm band on the right side of your tank. Press well with lots of steam.

retrotankcollage5

Almost finished! Time to sew on the neck band. You could either do it the way I’m going to show next or use the same bound method as the arm band. Its up to you. I’ve done both and like both ways.

STEP SIXTEEN: (and hopefully I’m still talkin sense because I’m holding a tired, cranky, flailing 10 month old now) Sew neckband right sides together with a 1/4″ seam allowance, or however your pattern calls for, along short side.

STEP SEVENTEEN: Press in half lengthwise and slip it onto the neck of the tank. Raw edges aligned, right side of tank facing out, pin neckband on, stretching to fit.

STEP EIGHTEEN: Sew with a 3/8″ seam allowance. I usually just use my serger for this part and let it be a little wonky because I’m lazy like that. Press up and away from tank using lots and lots of steam. Then press it some more.

retrotankcollage4

Add a rad tag with the size noted on it and then admire your work!

If you have a weird sense of humor like me, then maybe you’ll appreciate this template I drew up to share. When I was brainstorming summery things to make into a stencil, I kept thinking ice cream. Then as I started drawing different versions of cones and thinking the phrase “we all scream”, I started discussing it with my husband and then this “Ice scream” came out…..

IMG_9064 DOWNLOAD TEMPLATE HERE

To use it like I did, trace this onto freezer paper and cut out the black areas with an exacto knife. Save the little white heart shaped tongue piece to iron on in the center of the mouth. I forgot to iron mine on and had to freehand the tongue after the fact. Iron the stencil down onto your fabric and use fabric paint to color it in! FYI, the “Ice Scream” lettering isn’t included because I freehanded it with a paint brush and fabric paint. And you can too!

Because there was no other way to photograph this than to give my kid some ice cream, we went out and greased the wheels of the photo taking process by getting the model her first cone…

Ice scream shirt and stencil by girl like the sea

Ice scream shirt and stencil by girl like the sea

Ice scream shirt and stencil by girl like the sea

This kid runs around screaming ALL DAY and this was the best scream face she could give me…..not her greatest effort, I’ll tell you.

IMGP6067

Ice scream shirt and stencil by girl like the sea

Ice scream shirt and stencil by girl like the sea

Ice scream shirt and stencil by girl like the sea

In the end, mister Ice Scream got splashed on. hahaha. The best.

Have a great week, and thanks for reading.  Until next time…

Happy Sewing!

-Tara-